Easy-Laser® XT660 là thành viên thứ hai trong hệ thống cân chỉnh trục XT Generation, được xây dựng dựa trên nền tảng công nghệ đa nền đột phá. Giờ đây người dùng có thể hiển thị dữ liệu trên vô số thiết bị cầm tay khác nhau, cho phép tự do lựa chọn thiết bị phù hợp nhất để làm việc. Với XT660 có thể thực hiện các ứng dụng sau:

Cân chỉnh máy Kiểm tra Softfoot
Kiểm tra độ xoắn nền Chia sẻ tài liệu và tham khảo
Kiểm tra bạc đạn


Các đơn vị đo lường XT660 sử dụng công nghệ laser điểm. Điều này cho phép đo các máy lớn hơn và kéo dài hơn các hệ thống laser đường. Nó cũng cung cấp độ chính xác cao hơn khi khớp nối đang chuyển động. Ngoài ra, laser điểm cho phép bạn kiểm tra nhiều thứ hơn khi cài đặt máy, ví dụ: đo nền xoắn và làm sạch bạc đạn.

Với XT660, bạn có thể lựa chọn một số phương pháp đo khác nhau, ví dụ: quét liên tục và đa điểm. Điều này mang lại cho bạn sự linh hoạt mà bạn cần để đạt được kết quả đo hoàn hảo.

Các sản phẩm XT chắc chắn, được đánh giá cả chống nước và bụi IP66 và IP67. Cùng với thời gian hoạt động dài, điều này đảm bảo bạn sẽ có thể làm việc và hoàn thành ngay cả những công việc khó khăn.


Sử dụng đơn vị hiển thị Easy-Laser XT11 hoặc cài đặt ứng dụng XT Align miễn phí trên thiết bị iOS hoặc Android *. Giao diện người dùng trực quan hướng dẫn bạn thông qua quá trình đo lường.


Bộ hiển thị XT11 có camera 13MP. Bạn cũng có thể nhận được màn hình XT11 với camera IR tích hợp **! Điều này có nghĩa  bạn có thể thêm hình ảnh nhiệt của máy trước và sau khi căn chỉnh. Bạn có thể dễ dàng tạo và chia sẻ báo cáo PDF chứa tất cả dữ liệu đo lường và hình ảnh.

** Camera IR là tùy chọn


Measurement programs

The featured programs below are the most common used with this system. Please click here for a complete overview of possibilities.
*=accessories needed


Horizontal machines

The user interface is intuitive and guide you through the measurement process. It is animated and zooms into the most important things for each step. You can save the measurements of a machine for As found and As left in the same file.

Vertical/flange mounted machines

For measurement and alignment of vertically and flange mounted machines.

Easy-Laser XT machine train

Machine train

Build your own machine train with theoretically as many machines as you like. You can pick the reference machine manually, or let the program choose one that will minimize the need for adjustments.

Alignment program for cardan/offset mounted machines

Cardan/offset mounted machines*

For alignment of cardan/offset mounted machinery. (Requires additional Cardan bracket kit.)

Soft foot check

Alignment work begins with a soft foot check. The soft foot check ensures that the machine is resting evenly on all its feet by indicating which foot/feet should be adjusted. This is an important part of securing a reliable alignment. After the soft foot check is complete, you can go directly to the alignment program with all of the machine’s distance values saved.

Easy-Laser XT EasyTrend


Makes it possible to keep track of machine movement over time. Thus you can check for e.g. thermal expansion and pipe strain issues.

Twist measurement

Program to measure flatness/twist of, for example, machine foundation, machine tables, etc.


Values – digital dial indicators

The Values program has a clear digital representation of the laser target, and a list view for recorded values. Use it to measure as with dial gauges and to check bearing play.

Belt alignment*

Using the system you can align sheaves and pulleys with digital precision. Adjustment of the machines is displayed in real time on the screen, with readings for angle and axial displacement in both the vertical and horizontal axes, as well as an adjustment value for the front or rear foot pair. The result can be documented as normal. (Requires the XT190 BTA accessory.)

Vibration analysis*

Diagnose vibration level, unbalance, misalignment and looseness. (Requires the XT280 accessory.)


9-12-3 9-12-3

Measurement points are recorded at fixed points 9, 12 and 3 o’clock. This is the classic three-point method which can be used in most cases.

EasyTurn™ function EasyTurn™ function

The EasyTurn™ function allows you to begin the measurement process from anywhere on the turn. You can turn the shaft to any three positions with as little as 20° between each position to register the measurement values. Voila! Measurement is complete!

Continuous sweep Continuous sweep

Automatic recording of measurement values during continuous sweeping of the shaft. Hundreds of points are registered. You can start anywhere on the turn. Quality check of measurement is provided.

Multi point Multi point

Multi point is basically the same as EasyTurn™, but instead you can record multiple points on the sector rotated. This will provide an optimized calculation basis. Perfect for e.g. turbine and sliding bearing applications.

Smart functions


 Measurement value filter

An advanced electronic filter function can be used to achieve reliable results even under poor measuring conditions. Air turbulence and vibrations from adjacent machines are no match for the Easy-Laser® filter function!

 Result table

The result table shows how well your readings repeat and lets you save comments for each one.

 Multiple sets of feet

The software can adjust to machine designs of all types such as those with two pairs of feet, three pairs of feet, and feet in front of the coupling, etc.

 Thermal growth compensation

Oftentimes, machines expand considerably when moving from a cold to hot operating temperature. The Thermal Growth Compensation function allows the measurement system to calculate the appropriate shims and values needed to make adjustments in such cases. Compensation values for the machines are normally supplied by the manufacturers.

 Tolerance check

Measurement results can be checked against pre-defined tolerance tables or values you determine yourself. This allows you to immediately see if the alignment is within the approved parameters, thereby considerably reducing the amount of time spent on alignment.

 Swap view function

The swap view function allows you to adjust the position of the motor on screen to correspond with the position of the machine in front of you, making it easier to understand adjustment directions.

 360 Live adjustment

Adjust both vertically and horizontally at the same time with measuring units in any position.

360 live adjustment

 Wide live adjustment

Adjust with live values also when measuring units are positioned up to 44° from absolute V and H position.

 Adjustment guide

The adjustment guide helps you decide optimum adjustment by simulating shimming and move. For programs Horizontal and Machine train.

 Select machine image

Choose from different 3D machines to portray your machinery on either side of the coupling.

XT select machine 3D image

 Mirror machine image

The mirror view function allows you to adjust the position of the motor on screen to correspond with the position of the machine in front of you, making it easier to understand adjustment directions.

 Read QR and bar codes

Assign a specific code to a specific machine, then use the built-in camera of your device to open assigned file and settings. (Note: camera resolution requirements applicable.)


Save measurement files as templates, with machine data and settings, to quickly start measurements.

 Locked feet

Lock any pair of feet on the machine. Used when aligning base-bound or bolt-bound machines.

 Select coupling type

Choose method depending on coupling type: short flex or spacer shaft.

 Continue session

Your latest measurement is always available, automatically saved.

 Sign reports electronically

Sign-on screen to verify your job. The signature is saved with the PDF file.

 Built-in manual

The app includes a searchable Users Manual which opens the right chapter depending where in the process you are. This makes it quick and easy to find the answer to your user questions.

 AV connector

As standard the XT11 is equipped with a HDMI connector, making it possible to share the display screen direct on a TV monitor or projector screen without any additional software. Useful for training purposes with large groups.

 Multiple languages

The software is available in 12 languages: English, German, French, Spanish, Italian, Polish, Russian, Swedish, Brazilian Portugese, Japanese, Korean, Chinese (traditional and simplified).


Save to USB memory

Save your files to USB and copy to other devices.

Make a printout

Quickly print on a wirelessly connected printer.

Versatile reports

Use one of the two formats included, or design your own. Both a PDF and an Excel file is generated.

Save to built-in memory

Save all measurements in the display unit’s internal memory.

Add pictures

Add a photo of the machine to explain your work a little more. Add a thermal image to show the difference after alignment. (IR Camera is optional

Share your reports

Share the reports via email with your client, or to e.g. your OneDrive™ file area.




Display unit XT11

Rugged, robust, rubber coated design. IP66 and 67, dust- water- and shockproof. As standard a 13 MP camera for documentation is built-in*, and you can also choose to add an IR camera to the XT11.

Glove enabled touch-screen

A large 8″, glove enabled touch-screen makes the information clear and the app easy to use. The small OLED display shows battery status of both measuring units and display unit. You can check battery status also when the unit is turned off. The clever lock-screen button prevents unintentional clicks, for instance when moving between work positions.

*The camera can be removed if security reasons require.


  • Robust, rubber coated design, IP66/67.
  • Large 8” glove enabled touch-screen.
  • Screen-lock button.
  • OLED display shows the battery status.
  • IR Camera for thermal images (optional).
  • 16 hours operating time.
  1. OLED display
  2. Display brightness sensor
  3. Large and clear 8″ glove enabled touch screen
  4. Dust cover for connectors
  5. Enter button
  6. Screen-lock button/Battery status-check button
  7. Ergonomic, rubber coated housing
  1. Charger
  2. USB A
  3. AV connector
  4. USB B
  1. Charger
  2. USB A
  3. AV connector
  4. USB

Measuring units XT60-M / XT60-S

The XT60 measuring units utilize dot-type laser and 1-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft.

Rigid and rugged

The diagonally positioned fastening screws set the unit in a grid-lock on the rods. Rigid aluminium housing for maximum stability. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.


  • Built-in wireless technology. Integrated rechargeable battery.
  • TruePSD technology with unlimited resolution for greatest accuracy.
  • Dual laser beams and PSDs.
  • Sturdy aluminium body. IP66/67 design.
  • OLED display shows the angle of the unit
  • Slideable target
  • 24 hours operating time
  1. Laser angle adjustment
  2. Charger connector
  3. Locking knob
  4. Slidable target/dust cover
  5. OLED display: battery status/unit angle
  6. Extendable stainless steel rods
  7. Chain tightening knob
  8. PSD aperture
  9. Laser aperture

A complete system contains

All XT660 shaft systems include:​

  • 1 Measuring unit XT60-M
  • 1 Measuring unit XT60-S
  • 2 Shaft brackets with chains and rods
  • 4 Rods 60 mm [2.36″]
  • 2 Extension chain 900 mm [35.4″]
  • 1 Measuring tape 3 m [9.8′]
  • 1 Hexagon wrench set
  • 1 Charger (100–240 V AC)
  • 1 DC split cable for charging
  • 1 DC to USB adapter, for charging
  • 1 Quick reference manual
  • 1 Cleaning cloth for optics
  • 1 USB memory with manuals
  • 1 Documentation folder

XT660 also includes, depending on system:

  • 1 Display unit XT11
  • 1 Shoulder strap for display unit
  • 1 Carrying case Medium
  • 1 Carrying case Large



Display Unit

Type of display/size
VGA 8” colour screen, backlit LED, multitouch
Internal battery (fixed)
Heavy duty Li Ion chargeable
USB A, USB B, Charger, AV
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Wireless technology, WiFi
Relative humidity
OLED display
96×96 pixels
13 Mp, with diode lamp
IR camera (optional)
FLIR LEPTON® (0–450 °C, 32–842 °F)
Help functions
Built-in manual
Environmental protection
IP class 66 and 67
Housing material
WxHxD: 274x190x44 mm [10.8×7.5×1.7”]
Weight (without batteries)
1450 g [51.1 oz]
Operating time
Up to 16 h continuously

Measuring Units

XT60-M / XT60-S
BT wireless technology
Type of detector
1 axis TruePSD 20×20 mm [0.79×0.79″]
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
635–670 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
Housing material
Anodized aluminium + PC/ABS + TPE
WxHxD: 76×76.7×45.9 mm [3.0×3.0x1.8″]
272 g [9.6 oz]
OLED display
128×64 pixels
Operating time
Up to 24 h continuously


Bạn có thể tìm tài liệu sản phẩm và hướng dẫn sử dụng định dạng file PDF tại đây. Nó bao gồm các thông tin sản phẩm của chúng tôi. Phần mềm cập nhật cũng có sẵn trong phần Downloads.


Hệ thống đo lường Easy-Laser cực kỳ linh hoạt với nhiều tính năng mở rộng. Bằng cách kết hợp với phụ kiện thông minh, người dùng có thể đáp ứng bất kỳ nhu cầu về hệ thống cân chỉnh nào. Sử dụng ngay bây giờ để trải nghiệm và đảm bảo hiệu suất sản xuất và tiết kiệm chi phí tối ưu !