GEOMETRIC
MEASUREMENT
Geometric measurement technology spans an extremely wide field. From relatively simple straightness measurements of a member to considerably more complicated right angle measurements of machine tools and checks of turbines for power generation. The Easy-Laser® systems are excellent for taking all these types of measurements quickly and easily. The universal and intelligent design gives you many application possibilities, because the laser transmitter and detectors are designed to be twisted, turned and mounted in all possible and impossible ways!
Note. The display unit has a new design compared to what is shown in the pictures below.
-
E980 – SHAWMILL
Measurement and alignment of sawmill machinery
The Easy-Laser® E980 Sawmill system will help you increase efficiency and save money in your sawmill. The system measures straightness, flatness and squareness. Simple to use, even for your own maintenance and production staff. Equally useful on band saws and circular saws.
-
E970/E975 – PARALLELISM
For parallelism measurement – and more!
For parallelism measurement of rolls and other objects in numerous applications. The E970/E975 is especially suitable when many objects are to be measured and aligned, and when the distances are long. Any chosen object or the baseline can be used as a reference.
-
E960 – TURBINE ALIGNMENT
Reliabile and precise turbine alignment
Easy-Laser® E960 Turbine alignment systems make the measurement and adjustment work of diapraghms and bearings easier thanks to the wireless detector unit and measurement programs that guides you through the measurement process.
-
E950 – BORE ALIGNMENT
Bore alignment with the highest precision
Easy-Laser® E950 makes the control and adjustment work of bearings and bearing journals easier thanks to the wireless detector unit and measurement programs that guides you through the measurement process. All of the parts included in the systems are designed and built for even the most demanding workplace and for easy setup on any machinery.
-
E930 – EXTRUDER
Measurement system for alignment of extrusion machines
Easy-Laser® E930 is designed to measure straightness and pointing direction, primarily on extruder pipes. Another application can be hydraulic pipes for example.
An aligned extrusion machine leads to:
- Less wear on the extruder screw and tube.
- Even quality on the produced material.
- Lower energy consumption.
- Increased machine availability.
-
E920 – GEOMETRIC
Measurement system for all types of geometric measurement
Easy-Laser® E920 is a complete system in itself, with laser transmitter, detector and display unit. But it is also an excellent starting point for creating a measurement system that suits your specific needs and requirements, because all the measurement programs are included as standard! Add extra laser transmitters, measuring units and brackets as well as other accessories from the wide Easy-Laser range. Now or in the future.
-
E915 – FLANGE SPIN
Measure windmill tower flanges with spinning laser
Easy-Laser® E915 is a system used to measure flange flatness of windmill towers and slewing bearings with an easy-to-use rotating laser. You can see the result as a 3D image in the display unit immediately after measuring and you can evaluate the result with different calculation settings.
-
E910 – FLANGE
Measure windmill tower flanges of any size
Easy-Laser® E910 Flange is a system used to measure flange flatness of windmill towers, wings and hubs, tower bases, etc. It can also be used for parallelism measurement.
-
E975 – ROLL ALIGNMENT
Quick and accurate roll alignment
System E975 is designed mainly for roll alignment. It is well suited when just one or two rolls are to be replaced or adjusted at the same time. Because the system is so quick to set up on the machine even a short planned production stop can be utilized to measure a roll, and maybe replace or adjust it.